What are the common faults and countermeasures of quartz sand dryer?

What are the common faults and countermeasures of quartz sand dryer?
There are two main types of quartz sand dryers on the market, one is a single-cylinder dryer and the other is a three-cylinder dryer. Both types of dryers have their own advantages and disadvantages. However, the commonly used quartz sand dryers on the market are mainly three-cylinder quartz sand dryers. The three-cylinder quartz sand dryer has the characteristics of high temperature resistance, and can use high-temperature hot air to quickly dry materials, with large processing capacity. It has many advantages such as low fuel consumption and low drying cost, so it is deeply trusted and favored by many customers.
1. Strong vibration and loud noise.
During the operation of the quartz sand dryer, sometimes the equipment will vibrate strongly, resulting in increased noise. This is largely due to the device preventing imbalance. At the same time, if this happens, we need to check whether there is a problem with the installation of the dryer, and whether the connection parts of each screw and bolt are loose and fall off.
2, the dryer brake failure.
When the brake failure occurs during the operation of the quartz sand dryer, most of the cases are caused by the serious wear of the brake pads. At this time, we should pay attention to the replacement of the brake pads to ensure the safe operation of the quartz sand dryer.
3. The friction of the equipment bearing is serious.
The bearing is an important part of the quartz sand dryer. With the continuous drying operation, if the lubricating oil in the bearing part is missing, it is easy to cause the frictional resistance between the components to increase, resulting in serious bearing wear. Therefore, when we use the quartz sand dryer, we should pay attention to regularly check the oil loss or wear of the bearing parts, and replace it in time if there is an abnormality, so as not to affect the smooth progress of the quartz sand drying operation.
4. The raw material catches fire during the drying process of the sand.
Under normal circumstances, a large part of the fire of raw materials is due to the improper operation of the staff. Therefore, it is necessary to remind users and friends that they must be familiar with the operation instructions of the equipment before using the quartz sand dryer, and strictly follow the requirements to ensure the safety of the quartz sand drying operation.