Precautions for the initial use of the three-cylinder dryer

Precautions for the initial use of the three-cylinder dryer
When purchasing a slime dryer, how to install it Construction plan and arrangement of technical personnel, now the coal slime dryer equipment manufacturer, Linqu Sun will tell you about the precautions for the initial installation and use of the coal slime dryer.
1. During the installation of the slime dryer, the owner shall prepare in advance the required cranes, welding machines, electrodes, oxygen, acetylene, ladders and other unstable equipment and items that are not connected to the equipment.
2. Configure the power cord and control switch in accordance with the equipment installation instructions, so that the equipment can be controlled more safely.

3. To comply with the specific requirements of the design drawings, pay attention to check the main body and the horizontal angle and vertical situation during the installation process.
4. It must be installed in accordance with strict requirements. After the installation is completed, each component must be carefully and carefully inspected. Among them, bolts, power supplies, and lines are considered important and must be carefully checked.
5. For the installed slime dryer, it should be run empty, and it can be put into production after running well.
In addition, the technical staff specially reminded the on-site personnel to pay attention to the following points when operating the slime dryer:
1. During the operation of the equipment, it must not be viewed from the inside.
2. When the line of the slime dryer is grounded, strict insulation measures must be taken.
3. When the slime dryer is in operation, adjustment, cleaning and maintenance must not be done.
4. It must not be possible to directly move the material at the feeding place during the operation.
Only by strictly following the operating instructions can it be ensured that it can be put into use without fail.