Dry powder mortar dryer

Dry powder mortar dryer

Jiangsu Leijin Environment specializes in the production of dryers, and has carefully developed a new type of dry powder mortar dryer
Jiangsu Leijin Environment specializes in the production of dryers, and has carefully developed a new type of dry powder mortar dryer | mortar dryer. Customers have reported good results, energy saving and environmental protection, and are widely used in various industries.
Uses: This machine can be used for drying raw materials such as dry-mixed mortar, yellow sand, cement plant slag, clay, coal gangue, mixture, fly ash, gypsum, iron powder, etc. It is widely used in building materials, chemical industry, foundry and other industries.
Dry powder mortar dryer | Mortar dryer is mainly used to dry granular materials within a certain humidity and particle size range, such as yellow sand, molding sand, slag, cinder, small-sized clay, and other small-grained materials that are not afraid of high temperature and dust pollution. The moisture content of the dried material can reach below 1-0.5%.
1. Dry powder mortar dryer | main features of mortar dryer:
Features:
1. The investment in equipment is 1/6 of that of imported products. It is made of alloy steel plate, which is 3-4 times more wear-resistant than ordinary steel plates.
2. The initial moisture content of the material is 15%, and the final moisture content is guaranteed to be less than 0.5-1%. It is the preferred product for the production line of slag powder and dry-mixed mortar in cement plants.
3. The thermal efficiency is as high as 80% (the thermal efficiency of the traditional single-cylinder dryer is only 32%), and the thermal efficiency is increased by 48%
4. The fuel can be adapted to white coal, bituminous coal, coal gangue, oil and steam, and can bake block materials, pellets, powdery materials below 20-40mm,
5. Compared with the single-cylinder dryer, the floor area is reduced by about 50%, and the civil construction investment is reduced by about 50%.
6. There is no air leakage phenomenon, which solves the difficulty of sealing and can be installed within 2 hours.
7. The desired final moisture index can be easily adjusted according to user requirements.
8. When the discharge temperature is less than 50 degrees, it can be directly fed into the material warehouse without entering the cooling shed for cooling.
9. The temperature of the outer cylinder is 60 degrees, and the temperature of the exhaust gas is less than 100 degrees. The application time of the dust removal equipment bag is more than 2 times longer, and the water vapor comes out.
10. The coal consumption is 1/3 of the single-cylinder dryer, and the electricity is saved by 40%. The standard coal consumption per ton is less than 9 kilograms. The annual coal saving of small-scale dryers is 50-1 million yuan, and the annual coal saving of large-scale dryers is 1-2 million yuan.
2. Dry powder mortar dryer/mortar dryer process
Three, dry powder mortar dryer | technical parameters of mortar dryer:
Main technical parameters table (initial water <15%, final water <1.0%)