The use effect of sand three-cylinder dryer

The use effect of sand three-cylinder dryer
From the structure of the sand dryer, it can become a rotary dryer, suitable for drying slime, slag, fly ash, clay, etc. The dryer has the characteristics of high production efficiency, simple operation and good drying effect. Most of the sand dryers use a horizontal rotating cylinder, and the welded replica plates in the cylinder are staggered in several rows at different angles, and a refractory insulating layer can also be added according to user requirements. l Copy board to ensure the drying of material production indicators. There are many factors affecting the quality of the drying material in the dryer, such as high and low fuel value, material moisture content, uniformity of feed amount, fuel consumption, etc. The following work should not be taken lightly. The model and related parameters of the dryer should be strict, the feeding amount should be balanced, and the drying cycle should be fixed. When the drying equipment is installed and debugged, the later rework should be reasonably avoided, and the user's capital investment should be increased. Although the failure rate of high-quality dryers is low, testing and maintenance are closely related to the production process and product quality of the dryer. The degree of mechanization is high and the manual operation is good, but the real-time monitoring is beneficial to the stability of the dryer performance and the prolongation of the service life. The noise of the drying equipment, the lubrication of key parts, and the change detection of wearing parts cannot be ignored, so as to ensure that the above factors are as good as possible, and the dryer is an investment consideration. The sand dryer has the advantages of reasonable structure, excellent production, high output, low energy consumption and stable operation. When the dryer is running, we dry it dry. We can also control the size and moisture content of the finished product according to the user's requirements. The unique structure of the centering wheel system makes the engagement of the wheel and the roller always linear, reducing the damage and power consumption of the dryer during operation.