Talking about the typical configuration of dry mortar production line

Talking about the typical configuration of dry mortar production line
Mortar and Insulation
The dry mortar production line (normal configuration) is suitable for the production of one-component, one-component or two-component mortar. A typical dry mortar production line configuration is raw material storage - sand drying - weighing component - material mixing and stirring - finished product packaging, as well as raw material conveying, lifting and dust removal during the dry mortar manufacturing process. for manufacturing equipment.
Introduction of dry mortar production line (typical configuration)
1 large raw material storage tank
The dry mortar production line is used to store a large amount of raw materials such as cement, secondary fly ash and sand. Secondary fly ash for cement and bulk is supplied by tankers. When storing food, only two small raw material storage tanks are needed to store a small amount of rubber powder, HPMC and other raw materials. For small complete sets of equipment with a low degree of automation, manual supply can be selected.

2 Dry sand equipment
For drying damp sand. The system includes hot blast stove, dryer, screen, dust removal, cooling, transportation and lifting equipment. Dry mortar dryers are used in high output dry mortar production line systems. For specialty mortar producers, the amount of sand used is not very high. It is convenient to purchase finished refined dry sand.
3 batches of units
It consists of a hopper scale, a feeding dragon, a discharging device, a micro material adding device, and a computer control system. Automatically measure various raw materials according to the manufacturing method, reduce labor intensity and environmental pollution, and ensure the quality of dry mortar products.
4 Blender
Mixers are available in a variety of options, including twin screw cone mixers, coulter mixers, ribbon mixers and twin blade zero gravity mixers. The requirements for the dry powder mortar mixer are uniform stirring, no dead angle, high efficiency, wear-resistant equipment and fast discharging speed. In the Chengdu and Sichuan markets, some of the above mixers are widely used in dry mortar production lines, such as double-blade zero-gravity mixers and coulter mixers.
Suggestion: Gravityless mixer - suitable for mixing dry powder, and also can be equipped with "flying knife" according to customer requirements to improve fiber dispersion and mixing effect.
5 Dry powder packaging machine
There are open pockets and valve pockets. Dry powder mortar is often used in valve bag packaging machines, because valve bag packaging does not require seams and requires only one person to operate, but this dry powder packaging machine is not suitable for packaging lightweight materials. Open-pocket packaging scales can pack a variety of materials, but require sewing behind the bag. This packer requires another operator compared to the valve bag packer.
Recommended equipment: dry powder automatic packaging machine
6 Dust collector
Used to collect dust on dry mortar production lines and help protect the environment. Usually installed at the top of the cement silo, the feeding port of the elevator, etc.
7 Transport and lifting structures
The material conveying methods used in the silo on the production line include horizontal and vertical conveying. The horizontal conveying can use a screw conveyor, and the vertical conveying generally uses a bucket elevator or an electric elevator.
Features: Stable quality: At present, the quality of the mortar deployed at the construction site is unstable and the strength does not meet the requirements, but the dry-mixed mortar is industrially produced, and the mixing ratio with the raw materials is strict to ensure stable and reliable control of the quality of the mortar.